| Model | Description | Works With |
|---|---|---|
| ME-AGS-N (ME-AGS-PT1, ME-AGS-PT2) | Automatically start and stop your generator using multiple parameters. |
ME Series Inverter Charger | MS Series Inverter Charger | MSH Series Inverter Chargers |
| Model | Description | Works With |
|---|---|---|
| ME-AGS-S | The ME-AGS-S is the 'standalone' version of Magnum Energy's Automatic Generator Start (AGS) controllers. |
ME Series Inverter Charger | MS Series Inverter Charger | MSH Series Inverter Chargers |
| Model | Description | Works With |
|---|---|---|
| ME-BMK (ME-BMK-NS) | The ME-BMK/ME-BMK-NS is a single battery bank amp-hour meter that monitors and provides important information about the condition of the battery. |
ME Series Inverter Charger | MS Series Inverter Charger | MSH Series Inverter Chargers |
| Model | Description | Works With |
|---|---|---|
| ME-SBC | The ME-SBC is designed to monitor and charge a second battery using a portion of the current that is charging a main battery. |
ME Series Inverter Charger | MS Series Inverter Charger | MSH-RE Series Pure Sine Inverter Charger |
| Model | Description | Works With |
|---|---|---|
| 140000 | Single 8D (24-1/2" Length x 15" Width x 14-1/2" Height) |
| Model | Description | Works With |
|---|---|---|
| ME-DCLD | The ME-DCLD pigtail adapter is designed to provide a means to disable the inverter function when a 12v DC signal is removed. |
ME Series Inverter Charger | MS Series Inverter Charger | MSH-RE Series Pure Sine Inverter Charger |
| Model | Description | Works With |
|---|---|---|
| MM-DCLD | The MM-DCLD pigtail adapter is designed to provide a means to disable the MM or MM-AE Series inverter function when a 12v DC signal is removed. |
MM Series Inverter Charger | MMS Series Inverter Charger |
| Model | Description | Works With |
|---|---|---|
| MS-GFCI | The MS-GFCI accessory allows a GFCI (Ground Fault Circuit Interrupter) outlet to be installed directly on a Magnum inverter. |
| Model | Description | Works With |
|---|---|---|
| ME-CA25, ME-CA50, ME-CA60 | ME-CA25: 25' remote cable |
| Model | Description | Works With |
|---|---|---|
| ME-BTS-15 | Battery temperature sensor: 15' long cable Works with: LPC Series, MM Series, MMS Series, MS Series, NP Series |
| Model | Description | Works With |
|---|---|---|
| 310103-10 | Two red DC covers with cover screws. Works with NP Series. |
| Model | Description | Works With |
|---|---|---|
| ME-BTS-25 | Battery temperature sensor: 25' long cable Works with: LPC Series, MM Series, MMS Series, MS Series, NP Series |
| Model | Description | Works With |
|---|---|---|
| 310100 (310100-1, 310100-10, 310100-20) | Black DC terminal kit. Works with NP Series. 310100 includes: Terminal |
| Model | Description | Works With |
|---|---|---|
| ME-BTS-40 | Battery temperature sensor: 40' long cable Works with: LPC Series, MM Series, MMS Series, MS Series, NP Series |
| Model | Description | Works With |
|---|---|---|
| 310101 (310101-3, 310101-10, 310101-20) | DC terminal kit. Works with NP Series. 310101 includes: Terminal |
| Model | Description | Works With |
|---|---|---|
| 611622-15 | Temperature compensation: 15' cable assembly Works with NP Series |
| Model | Description | Works With |
|---|---|---|
| 611622-20 | Temperature compensation: 20' cable assembly Works with NP Series |
| Model | Description | Works With |
|---|---|---|
| 611622-25 | Temperature compensation: 25' cable assembly Works with NP Series |
| Model | Description | Works With |
|---|---|---|
| TC-GRAY | Top cover in grey. Serial number required when ordering. Works with ME Series, RD Series, and RD-E Series. |
| Model | Description | Works With |
|---|---|---|
| TC-MMS | Top cover in black. Works with: MMS Series, MMS-E Series |
| Model | Description | Works With |
|---|---|---|
| 651-02250-05 | Cable kits to go from battery to inverter. 5/16 battery terminal ring on one end, blunt cut on other end. |
| Model | Description | Works With |
|---|---|---|
| TC-MSH | Top cover in white. Serial number required when ordering. Works with: MSH-M Series, MSH-RE Series, MSH-RV Series |
| Model | Description | Works With |
|---|---|---|
| 652-02250-05 | Cable kits to go from battery to inverter. 3/8 battery terminal ring on one end, blunt cut on other end. |
| Model | Description | Works With |
|---|---|---|
| ME-RVC (ME-RVC-L) | The ME-RVC bridge module converts proprietary MagNet data to the commonly used RV-C communications protocol, allowing Magn |
ME Series Inverter Charger | 2000W 12VDC Pure Sine Inverter Charger MS Series | MS-PAE Series 120/240V Inverter Charger | RD Series Inverter Charger | MM Series Inverter Charger | MMS Series Inverter Charger |
| Model | Description | Works With |
|---|---|---|
| TC-WHT (TC-WHT-F) | Top cover in white. Serial number required when ordering. |
| Model | Description | Works With |
|---|---|---|
| 653-02250-05 | Cable kits to go from battery to inverter. 5/16 battery terminal ring on one end, 3/8 ring on other end. |
| Model | Description | Works With |
|---|---|---|
| 140004 | Single 31 (17-3/4" Length x 9-3/4" Width x 10-3/4" Height) |
| Model | Description | Works With |
|---|---|---|
| ME-RC-BZ | Mounting bezel for the ME-RC remote. Note: ME-ARC remotes come with bezel standard. |
ME-RC Remote Control | ME-ARC Remote Control |
| Model | Description | Works With |
|---|---|---|
| 430030 | Fuse holder for AMG type fuses Available accessory: 430031 |
| Model | Description | Works With |
|---|---|---|
| A88-0010 | Hardware kit includes AC door and DC covers in grey. Works with: ME Series, RD Series, RD-E Series |
| Model | Description | Works With |
|---|---|---|
| 654-02250-05 | Cable kits to go from battery to inverter. 3/8 battery terminal ring on one end, 3/8 ring on other end. |
| Model | Description | Works With |
|---|---|---|
| ME-SSI | Cable to series stack two MS4024 inverter/chargers to provide 120/240 VAC. |
4000W 24VDC Pure Sine Inverter Charger MS Series |
| Model | Description | Works With |
|---|---|---|
| A88-0011 | Hardware kit includes AC door and DC covers in white. |
| Model | Description | Works With |
|---|---|---|
| 659-02250-10 | Cable kits to go from battery to inverter. 5/16 battery terminal ring on one end, 1/4 ring on other end. |
| Model | Description | Works With |
|---|---|---|
| ME-TS60 | This temperature sensor connects directly to the ME-AGS Series and includes a 60' cable. |
ME-AGS Auto Gen Start |
| Model | Description | Works With |
|---|---|---|
| MM-ISA | The MM-ISA ignition switch adapter turns the inverter on and off with a 12-volt source |
| Model | Description | Works With |
|---|---|---|
| A88-0014 | Hardware kit includes AC door and DC covers in black. Works with: MM Series, MM-E Series, MMS Series, MMS-E Series. |
| Model | Description | Works With |
|---|---|---|
| 658-10350-05, 658-10350-18, 658-10350-20 | Cable kits to go from battery to inverter. 5/16 battery terminal ring on one end, 5/16 ring on other end. |
| Model | Description | Works With |
|---|---|---|
| ME-PT1, ME-PT2 | The ME-PT1 (pigtail one-wire) and ME-PT2 (pigtail two-wire) adapters connect to Magnum’s Auto Generator Start (ME-AGS) con |
ME-AGS Auto Gen Start |
| Model | Description | Works With |
|---|---|---|
| ME-ISW | The ME-ISW ignition switch lockout includes a pigtail adapter for 12-volt ignition switch lockout feature. |
| Model | Description | Works With |
|---|---|---|
| 655-02250-10 | Charger cable kits to go from battery to battery. 5/16 ring on one end, 5/16 ring on other end. |
| Model | Description | Works With |
|---|---|---|
| ME-BTS-6 | Battery temperature sensor: 6' long cable Works with: LPC Series, MM Series, MMS Series, MS Series, NP Series |
MM Series Inverter Charger | MMS Series Inverter Charger | LPC Series Pure Sine Inverter & Inverter/Charger |
| Model | Description | Works With |
|---|---|---|
| ME-RSA-M | Pigtail adapter for momentary remote switch |
| Model | Description | Works With |
|---|---|---|
| 310102-10 | Two black DC covers with cover screws. Works with NP Series. |
| Model | Description | Works With |
|---|---|---|
| 656-02250-10 | Charger cable kits to go from battery to battery. 3/8 ring on one end, 3/8 ring on other end. |
| Model | Description | Works With |
|---|---|---|
| 657-02250-10 | Charger cable kits to go from battery to battery. 5/16 ring on one end, 3/8 ring on other end. |
| Model | Description | Works With |
|---|---|---|
| ME-BTS-8 | Battery temperature sensor: 8' long cable Works with: LPC Series, MM Series, MMS Series, MS Series, NP Series |
| Model | Description | Works With |
|---|---|---|
| ME-RSA | Pigtail adapter for SPST remote switch |